Accessories for Sequential Blasting Machines
EXTENSION CABLES
EC15-2, EC15-10, EC15AW-250, ECAW15-300, and EC15AW-500 Extension Cables are available in 2 ft. (0.6 m.), 10 ft (3.0 m.), 250 ft. (76.2 m.), 300 ft. (91.4 m.) and 500 ft. (152.4 m.) lengths.
The EC15-10, EC15AW-250, EC15AW-300 and ECAW15-500 cables are used to connect the blasting machine to the TB15 terminal board.
The EC15-2 cable is used to connect the energy tester to the blasting machine. Cables of other lengths are available upon request.
Shipping Weight
EC15-2 1 lb. (0.5 kg.)
EC15-10 1 lb. (0.5 kg.)
EC15AW-250 17 lbs. (7.7 kg.)
EC15AW-300 21 lbs. (9.5 kg.)
EC15AW-500 32 lbs. (14.5 kg.)
TERMINAL BOARD
TB15 Terminal Board is a compact, durable, rugged, lightweight printed circuit design with 10 pairs of hookup terminals for up to 10 circuits. A socket is provided for connecting extension cables. The AD5 Load Plug provides the shunting requirement during connection of the detonators to the terminal board. In addition, the terminal board provides convenient Load Plug storage.
Shipping Weight: 5 lbs. (2.3 kg.)
BMS10 BLASTER'S MULTIMETER SWITCH
BMS10 Blaster's Multimeter Switch is used with an REO BO199.9-1 or BO1999-1 Single Circuit Blaster's Ohmmeter or other single circuit Blaster's Multimeters or Blasting Galvanometers when an REO BO1999-10 Ten Circuit Blaster's Ohmmeter is not available. The BMS10 aids in checking for errors and broken wires in multiple blast circuits. A blasting cable receptacle with an attached screw-on dust cap and two meter terminals provide the necessary connection between the meter and the blasting circuits. The enclosure is a rugged water and corrosion resistant polycarbonate plastic case.
Shipping Weight: 2 lbs. (0.9 kg.)
LOAD PLUG
AD5 (BM175 series) Load Plug is used to test blasting machines. The load plug contains 10 resistors, each equal to the maximum load resistance of the blasting machine.
Shipping Weight: 1 lb. (0.5 kg.)
LIMITED WARRANTY
Each unit is tested extensively before shipment and carries a 90 day LIMITED WARRANTY. If the unit fails to test or perform due to a defect in material or workmanship and is returned with shipment prepaid to Research Energy of Ohio, Inc., 200 East Bluegrass Dr, Norwalk, Ohio 44857, it will be repaired or replaced at our option. This LIMITED WARRANTY is void if the equipment has been dismantled, altered, or otherwise abused in any way.
The above LIMITED WARRANTY is exclusive and in lieu of all warranties, express or implied, including any implied warranty of merchantability or fitness for a particular purpose. Under no circumstances shall Seller or Manufacturer be liable for damages of any description occasioned by or resulting from operation or use of this equipment.
We cannot anticipate all conditions under which this information and our products, or our products in combination with the products of other manufacturers, may be used and therefore accept no responsibility for the results obtained, the suitability or the safety of our products when used alone or in combination with other products. The user must make his own tests to determine the suitability and safety of each product and product combination for his own purpose. We sell the product without warranty and the buyers and users assume all responsibility and liability for all losses (including anticipated profits), consequential damages, or incidental damages arising from the use of our products alone or in combination with other products.
Use of this equipment by persons not trained in blasting techniques will make the warranty null and void.
How to Order
Feel free to call, fax or email us. We look forward to serving you!
