200 East Bluegrass Dr Norwalk, Ohio 44857
Phone: 419-660-8832 Fax: 419-660-8833
Use of this equipment requires training in blasting techniques. Contact your powder company representative for training information.
This equipment must be operated in accordance with US Federal health and safety standards, state laws, rules and other applicable statutory provisions.
SUITABILITY: Properly trained and skilled personnel must determine suitability and safety factors of each blast.
IMPORTANT: Devices such as the REO Blasting Machine Energy Testers must be used to determine the energy output of each circuit prior to each blast.
Lead lines shall not be connected to the blasting machine until the circuit wiring has been verified by approved testers, the blast is ready to be fired and area safety is assured.
After the lead lines have been connected to the blasting machine, depress the CHARGE switch and hold it down. When the READY TO FIRE indicator lights, depress the FIRE switch while continuing to depress the CHARGE switch. Unless the CHARGE and FIRE switches are operated together, the machine will not fire.
CAUTION: WITH THIS MACHINE, AS WITH ALL BLASTING EQUIPMENT, STANDARD SAFETY RULES SHOULD BE FOLLOWED WHICH INCLUDE THESE: KEEP BLAST AREA CLEAR OF UNAUTHORIZED PERSONNEL, KEEP BODY AND HANDS AWAY FROM CONDUCTORS AND USE ONLY APPROVED TEST EQUIPMENT.
Copyright © 1999 Research Energy of Ohio, Inc. All rights reserved